Industrial turntable bearing is a kind of accessories used more in the society now. In our daily use, there will be more or less heat in swing bearing. When we encounter the problem of heat in swing bearing, if we cannot solve this problem in time, it will be a big harm to industrial turntable slewing bearing. Therefore, today our company, slewing ring bearing suppliers, will explain in which case, there may be heat in swing bearing, and how to deal with this situation correctly.
The shaft size of industrial turntable bearing is too large, so the industrial turntable bearing will be relatively tight.
In this case, we should provide appropriate tolerance for the shaft of swing bearing, and it is strictly forbidden to be too tight.
The grease coated with swing bearing such as the crane slewing bearing is too much or the oil level is too high.
In this case, the swing bearing will remove excess grease through the sealing hole, and the lubricating oil will drop the oil level just below the bearing box.
Improper type of grease or lubricating oil leads to lubricant failure. In this case, we need to re-select the appropriate type of lubricating oil.
Low oil level and insufficient grease.
In this case, the oil level outside the shaft diameter should be just below the retainer, and appropriate grease should be added.
The friction heating of inner ring and sealing ring. In this case, stop the machine and check the clamping ring screws to ensure that the inner ring is firmly attached to the shaft, and we can ensure that the free end swing bearing is installed correctly and the roller is aligned with the outer ring center line.